- 69 -
into each of the sub-menu that follows this field (a sub-menu is
proceeded by a ">").
Ø
The choice: Auto(ESCD) or Manual.
IRQ Resources
When resources are controlled manually, assign each system inter-
rupt a type, depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned
This item allows you to determine the IRQ assigned to the ISA bus
and is not available to any PCI slot. Legacy ISA for devices is com-
pliant with the original PC AT bus specification; PCI/ISA PnP for
devices is compliant with the Plug-and-Play standard whether de-
signed for PCI or ISA bus architecture.
Ø
The choice: PCI Device or Reserved.
PCI/VGA Palette Snoop
It determines whether the MPEG ISA/VESA VGA Cards can work
with PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and
PCI/VGA Card worked, Enable this field. Otherwise, please Disable
it.
Ø
The choice: Enabled or Disabled.
Assign IRQ For VGA
This item allows the user to set VGA IRQ Routing table Enabled or
Disabled.
Ø
The choice: Enabled or Disabled.
Assign IRQ For USB
This item allows the user the option to assign an IRQ to on-board
USB controller.
Since the on-board controller is always enabled, if no IRQ is as-
signed to it, there will be a question mark report on the sytem de-
vice under Windows95/98.
Ø
The choice: Enabled or Disabled.
INT Pin1/2/3/4 Assignment
Names the interrupt request (IRQ) line assigned to PCI 1 throught
PCI 4 on system. Activity of selected PCI slot awakens system.
Ø
The Choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
