- 54 -
Typematic Rate (Chars/Sec)
This item sets how many times the keystroke will be repented in a
second when you hold the key down.
Ø
The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke.
Ø
The choice: 250, 500, 750, or 1000.
Security Option
If you have installed password protection, this item defines if the
password is required at start up, or if it is only required when a user
tries to enter the setup utility.
Ø
The choice: System or Setup.
Note: To disabled security, select PASSWORD SETTING at Main
Menu, and then you will be asked to enter password. Do
not type anything and just press <Enter>; it will disable
security. Once the security is disabled, the system will boot,
and you can enter Setup freely.
OS Select For DRAM > 64MB
This item is required if you have installed more than 64MB of
memory and you running the OS/2 operation system. Otherwise,
leave the item at "Non-OS2" default.
Ø
The choice: Non-OS2 or OS2.
HDD S.M.A.R.T. Capability
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technol-
ogy) system is a diagnostics technology that monitors and predicts
device performance. S.M.A.R.T. software resides on both the disk
drive and the host computer.
The disk drive software monitors the internal performance of the
motors, media, heads, and electronics of the drive. The host soft-
ware monitors the overall reliability status of the drive. If a device
failure is predicted, the host software, through the Client WORKS
S.M.A.R.T. applet, warns the user of the impending condition and
advises appropriate action to protect the data.
Ø
The choice: Enabled or Disabled.
