- 62 -
UR2 Duplex Mode
This item allows you to selects the IR half/full duplex function.
Ø
The choice: Full or Half.
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/
O address setting.
Ø
The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port.
Select Normal, Compatible, or SPP unless you are certain your
hardware and software both support one of the other available
modes.
Ø
The choice: SPP, EPP, ECP, or ECP+EPP.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
Ø
The choice: 1 or 3.
Game Port Address
This item sets the I/O address for the game port.
Ø
The choice: Disabled, 201, or 209.
Midi Port Address
This item selects Midi Port Address.
Ø
The choice: Disabled, 330, or 300.
Midi Port IRQ
This item selects Midi Port IRQ.
Ø
The choice: 5 or 10.
Init Display First
This item allows you to decide to activate PCI Slot or on-chip VGA
first.
Ø
The choice: PCI Slot or AGP.
OnChip USB Controller
This should be enabled if your system has a USB installed on the
system board and you want to use it. Even when on chip USB so
equipped, if you add a higher performance controller, you will need
to disable this feature.
Ø
The Choice: All Disabled, All Enabled, 1&2 USB Port, 2&3 USB
Port, 1&3 USB Port, 1 USB Port, 2 USB Port, or 3 USB Port.
