Shuttle Omninas KD21 Page 69 User Manual Download

Page: 69 / 170

English

3-20

toraGe

anaGeMent

nterFace

External Devices

•

Mount — allow access to the disk image

• Unmount — remove access to the disk image
•

Format — erases all data and prepares HDD directory structure.

•

See

Formatted Capacity

to view total and available disk capacity for a particular drive.

Checking Disk Function

Disk Management

Disk removal is simple and easy. To accommodate the varying RAID types, hot swap and non-

hot swap disk removal is designed into the OMNINAS.

Replacing a Hot-swap Drive

You can replace a hot-swap drive (RAID 1 mode only) by using the hot-swap button found on the

front panel or through the Disk Manager menu on the OMNINAS interface.

IMPORTANT:

The formatting process deletes any data on the disk. Make sure you backup your data be-

fore proceeding. Do not power off or reboot the system to prevent damage.

To replace a drive using the Hot-swap button:

1. On the bay cover (front panel), press in the indicator to open the cover. The cover pops

open.

Extend the cover to allow access to the HDD trays.

Summary of Contents for Omninas KD21











































































































































































Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands

Shuttle Omninas KD21, User Manual

Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands