Shuttle Omninas KD21 Page 19 User Manual Download

Page: 19 / 170

English

2-1

ardware

nstallation

ettinG

tarted

Hardware Installation

This section includes information to help you install the hard drives in the OMNINAS before you

can begin using your storage device.

First Instance

The following guidelines provide information for first time installation of your OMNINAS. Before

you can get started, install the hard drives on your device. You can install either 2.5” or 3.5”

drives. The procedures are listed as follows:

Installing Hard Disk Drives

IMPORTANT:

To prevent data loss or damage to the system, power down your device before removing a

HDD.

1. If your system is not powered down, press the Power button for three (3) seconds until an

audible beep sounds and the LED starts to blink.

2. Once the device is powered down, press in the indicator on the bay door to open the cover.

The cover pops open.

Extend the cover to allow access to the HDD trays.

Opening the HDD Bay Door

Summary of Contents for Omninas KD21











































































































































































Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands

Shuttle Omninas KD21, User Manual

Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands