Shuttle Omninas KD21 Page 163 User Manual Download

Page: 163 / 170

English

6-1

roublesHootinG

Troubleshooting

In the event of hardware or interface issues, the following information is provided to assist in

solving most issues.

There are also resources and further information available for users on the following website.

Please feel free to use this resource and to contact the Shuttle support team if necessary.

OMNINAS website: http://global.shuttle.com/main/index

I forgot the administrator username or password.

• Use a long, thin pin to press the reset button on the back of NAS device. See

Reboot the system

• Use the default user name (admin) /password (no password) to enter the administrator mode.

I cannot find NAS device after configuration.

Perform the following:
1.

Unplug the LAN cable then connect it back. Go to step 2 if the issue is not resolved.

2. Set your PC TCP/IP settings to DHCP to obtain an automatic IP address.
3.

Press the power button for four (4) seconds to shutdown the NAS device. Wait for a complete sys

tem shutdown (10 seconds), then press the power button again to reboot the OMNINAS.

This procedure should allow you to set the OMNINAS and your PC on the same network group.

My NAS unexpectedly shutdown. What’s happening?

1. Make sure the NAS device is in a well ventilated area, the NAS device will shut down when the HDD

temperature is higher than 62°C.

2. Make sure the NAS device fan is still functioning. The fan is designed to cycle higher if the tempera-

ture is raises.

3. NAS device does not support old HDDs without SMART temperature support. (SMART temperature

required).

I think my USB port malfunctioned. What can I do?

Make sure the USB devices/hubs power usage is not over the specified maximum limit. If necessary,

provide external power for high power-demanding USB drive.

I cannot enter the administration page.

Make sure the administrator profile is not in use.

Log off the administrator profile or temporarily unplug the LAN cable.

Wait for 10 minutes (all previous access times out after 10 minutes).

4. Reconnect the LAN cable, then try to enter the administrator page again.

Summary of Contents for Omninas KD21











































































































































































Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands

Shuttle Omninas KD21, User Manual

Search results

Summary of Contents for Omninas KD21

Reviews:

Related manuals for Omninas KD21

Brands by name

Popular brands