- 61 -
Suspend Mode
When this item is not disabled and after the setup time of system inactiv-
ity, all devices except the CPU will be shut off.
Ø
The choice: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min,
20 Min, 30 Min, 40 Min, or 1 Hour.
Video Off Option
This item specifies on/off for the monitor when it enters the power-
saving mode.
Ø
The choice: Always On or Suspend ->Off.
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen
The item only writes blanks to the video buffer.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Ø
The choice: Blank Screen, V/H SYNC+Blank, or DPMS Support.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
PWR Button < 4secs
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms. This
item lets you install a software power down that is controlled by the
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec, then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø
The choice: Delay 4 Sec or Instant-Off.
Wake Up After PWR-Fail
This item defines your computer to shut off, automatically restart, or
return to its last operating status after power fails.
Ø
The choice: Auto, On, or Off.
IRQ/Event Activity Detect
Press <Enter> to enter into the detailed options.
PS2KB Wakeup Select
Set a password or a key to awaken the system from a keyboard.
VGA
When select ON, you can set the VGA to awaken the system.
Ø
The choice: OFF or ON.
