9
Install the Retention Mechanism and Heat Sink Support
Place the mainboard on a workbench (not in a chassis). Be sure that the mainboard is bare
(that is, no SIMMs, cables, or cards are installed).
Install the Retention Mechanism :
1. Finds out the Retention Mechanism (RM)
Mounting Holes and "Pin 1" mark of Slot 1
on HOT-641/P main board.
(Refer to Figure 2-8)
2. Insert the Retention Mechanism (RM)
around the Slot 1. Be sure the Square Cut
Mark of RM have the same orientation of
Slot 1 pin 1.(Refer to Figure 2-9)
3. Insert four RM Attach Pin through the RM
to secure it to the mainboard (four required
per Assembly). (Refer to Figure 2-9)
Figure 2-8
Figure 2-9
