19
Back Panel Connectors
COM1/COM2 Connectors
Attach COM1/COM2 device cables to these connectors.
PS/2 Keyboard & PS/2 Mouse Connector
Two 6-pin female PS/2 keyboard & Mouse Connectors is located at the rear of the main board.
PS/2 Mouse on top of connector and PS/2 Keyboard on the bottom of connector. Plug the PS/2
keyboard and mouse jack into this connector.
Parallel Port Connector
A 25-pin female connector is located at the rear of the main board. Plug the parallel port device
cable into this connector.
USB1/USB2 Port Connectors
Two female connectors are located at the rear of the board. Plug
the USB devices jack into this connector.
Other Connectors
ATX Power Supply Connector - J30
It is a twenty-pin male header connector. Plug the connector from
the power directly onto the board connector while making sure the
pin 1 is in its position. The main board requires a power supply
with at least 200 watts and power good signal.
IR Connector - JP22
Infrared device connector may attach a 5-pin infrared
device cable to this connector for enabling the infrared
transfer function. This mainboard meets the specification
of ASKIR and HPSIR. Figure 2-31shows JP22's
pin assignment and Figure 2-33 show JP22 location.
Figure 2-30
Figure 2-31
Figure 2-29
