20
CPU & AGP cooling Fan
connectors - J26 & FAN3
The main board provides two onboard 12V
cooling fan power connectors for CPU (J26)
and AGP device cooling fan (FAN3). Depend-
ing on the fan maker, the wiring and plug may
be different. The red wire should be connected
to +12V and black wire should be connected to
ground (GND)
Wake-On-LAN Connector - J39
Attach a 3-pin connector from the LAN card
which supports the Wake-On-LAN (WOL)
function. This function lets users wake up the
connected system through the LAN card.
Enhanced IDE and Floppy
connectors
The main board shipped with one 40-pin
ribbon cable for IDE H.D.D , one 34-pin
ribbon cable for F.D.D. Ribbon cables should
always be connected with the red stripe on the
Pin 1 side of the connector.
Figure 2-33
Figure 2-32
