37
DMA/master
When set to
On
(default), any event occurring to the DMA controller will awaken a
system which has been powered down.
Modem Ring /LAN Resume
When set to
Enabled
, any event occurring Modem Ring/activity of LAN will awaken a
system which has been powered down.
Note : The mainboard support Wake-ON-LAN function with Intel LAN card only.
RTC Alarm Resume
When set to
Enabled RTC Alarm Resume
, you could set the date (of month) and timer
(hh:mm:ss), any event occurring at RTC will awaken system which has been powered
down.
Primary INTR
When set to
On
(default), any event occurring at will awaken a system which has been
powered down.
The following is a list of IRQ, Interrupt ReQuests, which can be exampled much as the
COM ports and LPT port above can. When an I/O device wants to gain the attention of
the operating system, it signals this by causing an IRQ to occur. When the operating
system is ready to respond to the request, it interrupts itself and performs the service.
As above, the choices are
On
and
Off
.
When set On, activity will neither prevent the system from going into a power manage-
ment mode nor awaken it.
- IRQ3 (COM 2)
- IRQ4 (COM 1)
- IRQ5 (LPT 2)
- IRQ6 (Floppy Disk)
- IRQ7 ( LPT 1)
- IRQ8 (RTC Alarm)
- IRQ9 (IRQ2 Redir)
- IRQ10 (Reserved)
- IRQ11 (Reserved)
- IRQ12 (PS/2 Mouse)
- IRQ13 (Coprocessor)
- IRQ14 (Hard Disk)
- IRQ15 (Reserved)
