- 61 -
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS Supported Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS Supported.
HDD Power Down
The IDE hard drive will spin down if it is not accessed within a specified
length of time. Options are from 1 Min to 15 Min and Disable.
Ø
The choice: Disabled, 1 Min ~ 15 Min.
HDD Down In Suspend
The item allows you to enabled or disabled the HDD Down In Sus-
pend.
Ø
The choice: Enabled, Disabled.
Soft-Off By PBTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has " hung".
Ø
The choice: Delay 4 Sec, or Instant-Off.
PWRON After PWR-Fail
This item allows you to select power on function when power fail.
Ø
The choice: Former-Sts, Off or On.
WOL(PME#) From Soft-Off
If this item sets to Enable, the system power will be turned on when the
LAN port receives an incoming signal. You have to connect the fax/
modem to the mainboard Wake On LAN connector for this feature to
work.
Ø
The choice: Enabled, Disabled.
WOR(RI#) From Soft-Off
If this item is enable, it allows the system to resume from a software
power down or power-saving mode whenever there is an incoming call
to an installed fax/modem. You have to connector the fax/modem to
the mainboard.
Ø
The choice: Enabled, Disabled.
