- 9 -
Ø
2 x USB connectors on back-panel, one set of dual USB port header on mid-
board.
-
I/O Interface
Provides a variety of I/O interfaces:
Ø
1 Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø
1 COM1 Port.
Ø
1 SPDIF IN Port.
Ø
1 1394 Port.
Ø
1 PS/2 Keyboard Port.
Ø
1 PS/2 Mouse Port.
Ø
1 10/100/1000 LAN Port.
Ø
2 USB 1.1/2.0 Ports.
Ø
1 Coaxial Port.
Ø
1 Line-InPort.
Ø
1 Center/Bass-Out port.
Ø
1 Rear-Out port.
Ø
1 Front-Out port.
-
PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133 Bus Master Dual-channel IDE ports provide support to a
maximum of four IDE devices (one Master and one Slave per channel). The IDE
Bus implements data transfer speeds of up to 133/100/66/33 MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
-
ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin standard ATX
power connectors, supporting Suspend and Soft-On/Off by dual-function power
button. One 4-pin 12V ATX power connector.
-
Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Sus-
pend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving
Features controlled by your operating system that supports OS Direct Power
Management (OSPM) functionality.
