- 39 -
3.3 System Memory Configuration
The FN95 mainboard has two 184-pin DIMM slots that allow you to install
from 64MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-line
Memory Module) Slot can accommodate 64MB, 128MB, 256MB, 512MB, and
1GB of PC2100, PC2700 or PC3200 compliant 2.6V single or double side 64-
bit wide data path DDR SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: Total 2 DIMM capacities are up to 2GB max and 1GB per DIMM.
Devices Used on DIMMs
Size Per CS
64 M-bit (2M x8-bits x4 bnaks)
64 Mbyte
64 M-bit (1M x16-bits x4 bnaks)
32 Mbyte
128 M-bit (4M x8-bits x4 bnaks)
128 Mbyte
128 M-bit (2M x16-bits x4 bnaks)
64 Mbyte
256 M-bit (8M x8-bits x4 bnaks)
256 Mbyte
256 M-bit (4M x16-bits x4 bnaks)
128 Mbyte
512 M-bit (16M x8-bits x4 bnaks)
512 Mbyte
512 M-bit (8M x16-bits x4 bnaks)
256 Mbyte
1 G-bit (32M x8-bits x4 bnaks)
1 Gbyte
1 G-bit (16M x16-bits x4 bnaks)
512 Mbyte
DIMM1
DIMM2
64-Bit
Single Side
X
64-Bit
Double Side
X
128-Bit
Single Side
Single Side
128-Bit
Double Side
Double Side
Note: Please plug the DIMM1 first.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new system
memory value will automatically be computed and displayed in the field " Stan-
dard CMOS Setup" of BIOS setup program.
Memory Configuration:
