- 58 -
Serial-ATA 2(Internal PHY)
This item allows you to enable/disable the Serial-ATA 2(Internal PHY).
Ø
The choice: Enabled or Disabled.
IDE DMA transfer access
This item allows you to enable/disable the IDE DMA transfer access.
Ø
The choice: Enabled or Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode(most
new drivers do), select Enabled for automatic detection of the optimal
number of block read/write per sector the drive can support.
Ø
The Choice: Enable or Disabled.
Onboard PCI Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Init Display First
This item is used to determine initial device when system power on.
Ø
The choice: AGP Slot or PCI Slot.
OnChip USB
This should be enabled if your system has a USB installed on the system
board and you want to use it.
Ø
The choice: Desable, V1.1+V2.0, or V1.1.
USB KB/Storeage Support
Select Enabled if your system contains a Universal Serial Bus(USB)
controller and you have a USB KB/Storeage.
Ø
The Choice: Enabled or Disabled.
OnChip Audio
This item allows you to control the onboard Audio.
Ø
The Choice: AUTO or Disabled.
Onboard SuperIO Device
Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.
Onboard FDC Controller
This item specifices onboard floopy disk drive controller. This setting
allows you to connect your floopy disk drives to the onboard floopy
