- 57 -
Power Management
This category allows you to select the type (or degree) of power saving
mode settings.
Min Saving
Minimum power management.
Suspend Mode=1 hr.
Max Saving
Maximum power management.
Suspend Mode=1 min.
User Define
Allows you to set each mode individually.
Suspend Mode= Disabled or 1 min ~1 hr.
Ø
The choice: Min Saving, Max Saving, or User Define.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS.
Video Off In Suspend
This item determines the manner in which the monitor is blanked.
Ø
The choice: Yes or No.
Suspend Type
This item allows you to select the Suspend Type.
Ø
The choice: Stop Grant or PwrOn Suspend.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Suspend Mode
When this item is enabled and after the setup time of system inactivity,
all devices except the CPU will be shut off.
Ø
The choice: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min,
30 Min, 40 Min, or 1 Hour.
HDD Power Down
When this item is enabled and after the setup time of system inactivity,
the hard disk drive will be powered down while all other devices
remain active.
Ø
The choice: Disabled or 1 Min~15 Min.
