- 35 -
3.3 System Memory Configuration
The FB54 mainboard has two 184-pin DIMM slots that allow you to install
from 64MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-line
Memory Module) slot can accommdate 64MB, 128MB, 256MB, 512MB,
and 1GB of PC1600/PC2100/PC2700 compliant 2.5V single or double side
64-bit wide data path DDR SDRAM modules.
1. Install Memory:
Install memory in any or all of the banks. The combination shown as follows.
Note: The total installed memory does not exceed 2GB.
Note: You need not to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Don't support double-sided X16 DDR DIMMs.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks. After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
DIMM
Socket
Memory Modules
Module
Quantity
DIMM 1
64MB, 128MB, 256MB, 512MB and 1GB184-pin
2.5V DDR SDRAM DIMM
x 1
DIMM 2
64MB, 128MB, 256MB, 512MB and 1GB184-pin
2.5V DDR SDRAM DIMM
x 1
