Shuttle FB51 Manual Download Page 10

Page: 10 / 81

- 8 -

2 FEATURES

FB51 mainboard is carefully designed for the demanding PC user who wants high

performance and maximum intelligent features in a compact package.

2.1 Specifications

CPU Support

Intel Pentium 4/Celeron, 478-pin processors with 400/533 MHz FSB.

Chipset

Features Intel Brookdale-GE GMCH N.B. and ICH4 S.B..
Onboard Lan

Onboard Lan

Onboard Lan
Realtek 8100B, support 10Mbps and 100Mbps operation.
Onboard 1394a

Onboard 1394a

Onboard 1394a
VIA VT6306, support 400Mb/s, 200Mb/s, or100Mbits/s data transfer rate.

Jumperless CPU Configuration

Soft-configuration FSB (The FSB speed is software configurable from 100MHz

to 166MHz in the Frequency/Voltage Control of BIOS setup program.)

On Board 5.1 Channel AC97 Audio

Compliant with AC'97 2.2 specifications.
5.1 channel slot selectable DAC Output for multi-channel applications.

Versatile Memory Support

Two 184-pin

184-pin

184-pin DIMM slots to support up to 2GB of PC1600, PC2100 or

PC2700 compliant DDR SDRAM module.

AGP Expansion Slot

Provides one 32-bit AGP slot which support 1X/2X/4X AGP device.

PCI Expansion Slots

Provides one 32-bit PCI slot.

6 USB 2.0/1.1 Complaint Interface Onboard

2 x USB 2.0 connectors on back-panel and two sets of dual USB ports
headers on mid-board.

Summary of Contents for FB51


















































































Search results

Summary of Contents for FB51

Reviews:

Related manuals for FB51

Brands by name

Popular brands

Shuttle FB51, Manual

Search results

Summary of Contents for FB51

Reviews:

Related manuals for FB51

Brands by name

Popular brands