- 26 -
Jumpers
JP2
: Clear CMOS setting
Back Panel Connectors
COM1/2
: Serial port 1/2 (DB9 male)
VGA
: VGA port (DB15 female)
1394
: 2 x 1394 (0/1) Ports
LAN
: 10/100 base-T LAN Port
USB
: 2 USB 2.0/1.1 (0/1) (Universal Serial Bus) ports
MS
: PS/2 mouse port
KB
: PS/2 keyboard port
BASS/CENTER
: Audio Bass/Center-Out Port
LINE-OUT
: Audio Line-Out Port
LINE-IN
: Line-In Port
SPDIF_In
: SPDIF In Port
Front Panel Connectors
PWON
: ATX power on/off momentary type switch
HLED
: IDE drive active LED
GLED/PLED
: Green LED (ON when system stays in power saving
mode) / System power LED
R S T
: Hardware reset switch
JP6/JP7
: Extended USB Header
JP3
: Front Panel IEEE1394 header
JP10
: SPDIF_Out header
JP11
: Front-Panel Microphone and Line-Out Connector
Internal Peripherals Connectors
FDD
: Floppy disk drive interface
IDE1
: IDE primary interface (Dual-channel)
IDE2
: IDE secondary interface (Dual-channel)
Other Connectors
CN6/CN7
: ATX power connectors
C1
C2
C3
C4
D2
D3
D1
C5
E1
C6
B2
B1
B3
B4
B5
B6
B7
B8
B9
B10
B11
C7
A1
C8
