- 71 -
USB KB Wake-up S3
USB KB Wake-up S3
USB KB Wake-up S3
USB KB Wake-up S3
USB KB Wake-up S3
If you are using a USB keyboard, and the ACPI suspend type is set to
S3, you can enable this item to allow a keystroke to wake up the system
from power saving mode.
Ø
The choice: Enabled or Disabled.
Resume by Alarm
Resume by Alarm
Resume by Alarm
Resume by Alarm
Resume by Alarm
When this item enabled, your can set the date (day of the month) and
time to turn on your system.
Ø
The choice: Disabled or Enabled.
*** Reload Global Timer Events ***
*** Reload Global Timer Events ***
*** Reload Global Timer Events ***
*** Reload Global Timer Events ***
*** Reload Global Timer Events ***
Global Timer (power management) events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or
can awaken the system from such as a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary/Secondary IDE 0/1
Primary/Secondary IDE 0/1
Primary/Secondary IDE 0/1
Primary/Secondary IDE 0/1
Primary/Secondary IDE 0/1
When these items are enabled, the system will restart the power-saving
time out counters when any activity is detected on any of the drives or
devices on the primary or secondary IDE channels.
Ø
The choice: Disabled or Enabled.
FDD, COM, LPT Port
FDD, COM, LPT Port
FDD, COM, LPT Port
FDD, COM, LPT Port
FDD, COM, LPT Port
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the floppy disk drive,
serial ports, or the parallel port.
Ø
The choice: Disabled or Enabled.
PCI PIRQ [A-D] #
PCI PIRQ [A-D] #
PCI PIRQ [A-D] #
PCI PIRQ [A-D] #
PCI PIRQ [A-D] #
When this item is disabled, any PCI device set as the Master will not
power on the system.
Ø
The choice: Disabled or Enabled.
