Shuttle FB51 Manual Download Page 76

Page: 76 / 81

- 74 -

PC Health Status

CPU Fan AutoGuardian

This SMART Bios enabled 3 phase Variable Fan Speed and CPU tem-

perature Control feature.

The choice: Enabled or Disabled.

This feature is controlled via Bios, in which the CPU fan rotational

speed sensing /control is governed by CPU temperature setting

preselected in Bios.

By default, "CPU Fan AutoGuardian" feature under PC Health Status is

enabled.

Note:

Note: Before manually modifying the CPU fan setting, please make

sure both fan connectors are plug into the correct fan connector

designations on the mainboard.

Our default for fan cooler is set to Fan 3.

FA N 3

FA N 2

FA N 1

User Set CPU Fan

Enabled you to choose one specific fan for further setting.

The choice: Fan1, Fan2, Fan3, or Fan1 & Fan3 .

Fan Speed Up When CPU Temp

Enabled 3 phase smart control to the Selected fan. This feature ranges

from 48

C to 80

C, in an increment of 4

C. The default temperature is

at 72

The choice: 48

C, 52

C, 56

C, 60

C, 64

C, 68

C, 72

C, 76

Summary of Contents for FB51


















































































Search results

Summary of Contents for FB51

Reviews:

Related manuals for FB51

Brands by name

Popular brands

Shuttle FB51, Manual

Search results

Summary of Contents for FB51

Reviews:

Related manuals for FB51

Brands by name

Popular brands