- 60 -
Suspend Mode
When this item is not disabled and after the setup time of system inactiv-
ity, all devices except the CPU will be shut off.
Ø
The choice: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min,
20 Min, 30 Min, 40 Min, or 1 Hour.
Video Off Option
This item specifies on/off for the monitor when it enters the power-
saving mode.
Ø
The choice: Always On or Suspend ->Off.
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen
The item only writes blanks to the video buffer.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Ø
The choice: Blank Screen, V/H SYNC+Blank, or DPMS Support.
PWR Button < 4 secs
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms. This
item lets you install a software power down that is controlled by the
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec, then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø
The choice: Delay 4 Sec or Instant-Off.
PWRON After PWR-Fail
This item allows your computer to shut off, automatically restart, or
return to its last operating status after power fails.
Ø
The choice: Off, On, or Former-Sts.
IRQ/Event Activity Detect
Press <Enter> to enter into the detailed options.
PS2KB Wakeup Select
Set a password or a key to awaken the system from a keyboard.
Power Button Lock
When Enabled, you can set the password to lock the system.
Ø
The choice: Disabled or Enabled.
