- 58 -
Midi Port IRQ
This item defines an interrupt request for the MIDI port.
Ø
The choice: 5 or 10.
Init Display First
This item is used to determine initial device when system power on.
Ø
The choice: PCI Slot or AGP.
OnChip USB Controller
Do not disable this item if your system has a USB installed on the sys-
tem board and you want to use it.
Ø
The choice: All Disabled, All Enabled, 1&2 USB Port, 2&3 USB Port,
1&3 USB Port, 1 USB Port, 2 USB Port, or 3 USB Port.
USB 2.0 Support
Select Enabled if your system contains a USB 2.0 controller.
Ø
The Choice: Disabled or Enabled.
USB Keyboard Support
Select Enabled if your system contains a USB controller and you have a
USB keyboard.
Ø
The Choice: Disabled or Enabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode (most
new drivers do), select Enabled for automatic detection of the optimal
number of block read/write per sector the drive can support.
Ø
The Choice: Enabled or Disabled.
