- 61 -
Secondary Master / Slave PIO
In this items, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
settings for on board Secondary Master / Slave PIO timing.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master / Slave UDMA
On this mainboard, AV11 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to
33MB/sec.
Auto
is the default settings for on board Primary Master /
Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
The choice: Auto, Disabled.
Secondary Master / Slave UDMA
On this mainboard, AV11 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to
33MB/sec.
Auto
is the default settings for on board Secondary Master /
Slave
UltraDMA 33/66
.
Note : Your hard drive must also support UDMA for this feature to
work.
The choice: Auto, Disabled.
Init Display First
This item is used to determine initial device when system power on.
The choice: AGP, PCI Slot.
POWER ON Function
This item is used to defined Keyboard & PS/2 mouse power-on func-
tion enabled or disabled.
The choice: Password, Hot KEY, Mouse Left, Mouse Right, Button
Only, keyboard 98.
Note:1. When item of PS/2 Mouse or HOT-Key is selected, please
also adjust jumper JP3 to the proper position.
2. USB keyboard, USB Mouse and Serial Mouse are not
supported to this function.
KB Power On Password
Power-on by soft-on/off
The choice: Enter.
