manualshive.com logo in svg

Shuttle AV11, User Manual

Share
Download
Shuttle AV11 User Manual Download Page 52

- 50 -

Spread Spectrum

This item allows the user to enable Spread Spectrum Modulated to
reduce the EMI.

The choice: Enabled, Disabled.

CPU Host /PCI Clock

This item allows the user to adjust CPU Host Bus Clock from BIOS
when JP8 is set to Default.
The user may adjust CPU Host Clock from 66 MHz to 83 MHz when
66 MHz based Celeron processor is used, from 100 MHz to 112 MHz
when 100 MHz based Pentium II/III processor is used, and from 124
MHz to 150 MHz when 133 MHz based Pentium III processor is used.
This item will not show up when JP8 is set to Manual.

The choice: 66/33MHz, 68/34MHz, 75/37MHz, 83/41MHz, 95/
31MHz, 100/33MHz, 103/34MHz, 112/37MHz, 124/31MHz, 133/
33MHz, 138/34MHz, 140/35MHz, 150/37MHz, Default.

CPU Warning Temperature (optional)

Since the mainboard support CPU temperature monitoring and over-
hear alert.  This item allows the user to set the threshold of CPU
warning temperature.  When CPU temperature over the threshold,
system will slow down clock to prevent CPU damage.

The choice: Disabled, 50°C/122°F, 53°C/127°F, 56°C/133°F,
60°C/140°F, 63°C/145°F, 66°C/151°F, 70°C/158°F.

Current System Temperature (optional)

Since the mainboard support System and CPU temperature monitoring
and overheat alert.  This item indicate the current main board tempera-
ture.

Current CPU Temperature (optional)

Since the mainboard support System and CPU temperature monitoring
and overheat alert.  This item indicate the current Processor tempera-
ture.

Current CPUFAN1/2/3 Speed (optional)

The mainboard can detect three fans rotation speed for CPU cooler
and system.

Summary of Contents for AV11




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands