manualshive.com logo in svg

Shuttle AV11, User Manual

Share
Download
Shuttle AV11 User Manual Download Page 3

- 1 -

WHAT’S IN THE MANUAL ................................................................ 4

Quick Reference .................................................................................................4

About This Manual..............................................................................................4

Technical Support ..............................................................................................4

1 INTRODUCTION ............................................................................ 5

1.1 TO DIFFERENT USERS................................................................................5

FIRST-TIME DIY SYSTEM BUILDER ....................................................... 5

EXPERIENCED DIY USER ....................................................................... 5

SYSTEM INTEGRATOR ........................................................................... 5

1.2 ITEM CHECKLIST .........................................................................................6

2 FEATURES.................................................................................... 7

2.1 SPECIFICATIONS .........................................................................................7

3 HARDWARE INSTALLATION....................................................... 10

3.1 STEP BY STEP INSTALLATION................................................................10

Accessories Of AV11 ...............................................................................10

STEP 1 Install the CPU ........................................................................... 11

STEP 2 Set Jumpers ...............................................................................12

STEP 3 Install SDRAM System Memory ................................................. 12

STEP 4 Install Internal Peripherals in System Case ............................... 13

STEP 5 Mount the Mainboard on the Computer Chassis ....................... 14

STEP 6 Connect Front Panel Switches/LEDs/Speaker .......................... 15

STEP 7 Connect IDE & Floppy Disk Drives ............................................ 17

STEP 8 Connect Other Internal Peripherals ........................................... 17

STEP 9 Connect the Power Supply......................................................... 18

STEP 10 Install Add-on Cards in Expansion Slots .................................. 18

TABLE OF CONTENTS

Summary of Contents for AV11




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands