manualshive.com logo in svg

Shuttle AV11, User Manual

Share
Download
Shuttle AV11 User Manual Download Page 4

- 2 -

STEP 11 Connect External Peripherals to Back Panel ........................... 19

STEP 12 First Time System Boot Up ...................................................... 20

STEP 13 Install Drivers & Software Components ................................... 21

3.2 JUMPER SETTINGS ...................................................................................22

Jumpers & Connectors Guide ................................................................. 23

Set Keyboard & PS/2 Mouse Power-On (JP3) ........................................ 25

CPU Host Frequency Setting  (JP8) ........................................................ 26

CPU Clock Ratio Setting (JP9) ................................................................ 27

Clear CMOS (JP12) ................................................................................. 28

PS/2 Keyboard & PS/2 Mouse Connectors ............................................. 28

USB1 / USB2 Port Connectors ................................................................ 29

COM1 / COM2 Connector ....................................................................... 29

Parallel Port Connector............................................................................ 29

ATX Power On/Off Switch Connector (PON) .......................................... 29

Green LED Connector (GLED) ................................................................ 30

EPMI Connector (EPMI) .......................................................................... 30

HDD LED Connector (HDLED)................................................................ 30

PWR LED Connector (PWLED) .............................................................. 30

Hardware Reset Connector (RST) .......................................................... 31

Speaker Connector (SPK) ....................................................................... 31

Enhanced IDE Ports and Floppy Connectors ......................................... 31

ATX Power Supply Connector (J5).......................................................... 32

Cooling Fan Connectors for CPU (JP1),
Chassis (JP2), (J9) & (J12)...................................................................... 32

IR Connector (J4) .................................................................................... 33

Wake-on LAN Connector (J16) ............................................................... 33

SB-Link Connector (JP10) ....................................................................... 34

Summary of Contents for AV11




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands