manualshive.com logo in svg

Shuttle AK37GT, User Manual

Share
Download
Shuttle AK37GT User Manual Download Page 84

- 81 -

Auto Detect DIMM/PCI Clk

This item allows you to enable/disable auto detection DIMM/PCI Clock.

Ø

The choice: Enabled or Disabled.

Spread Spectrum

This item allows you to enable/disable the spread spectrum modulation.

Ø

The choice: Enabled or Disabled.

CPU Voltage default

This item show CPU voltage is set by manufacturer prior to delivery.

CPU Vcore Select

This item allows you to select CPU Vcore.

Ø

The choice: Default, 1.100 ~ V1.825V, or Above 1.85V.
Note:

CPU VCore above 1.85V item need to be selected, save
and quit BIOS, before you adjust CPU Vcore over 1.85V.

CPU Vcore Above 1.85V

This item allows you to select CPU Vcore above 1.85V.

Ø

The choice: 1.850V ~ 2.400V

DDR Voltage Control

This item allows you to control DDR Voltage.

Ø

The choice: Auto or Manual.

DDR Voltage Select

This item allows you to select DDR Voltage.

Ø

The choice: Default, 2.55V, 2.60V, 2.70V, 2.75V, 2.80V or 2.85V.

AGP Voltage Select

This item allows you to select AGP Voltage.

Ø

The choice: Default, 1.60V, 1.70V or 1.80V.

Chipset Voltage Select

This item allows you to select Chipset Voltage.

Ø

The choice: Default, 2.60V, 2.70V or 2.80V.

Summary of Contents for AK37GT
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands