- 36 -
D1
F
Internal Peripherals Connectors
Enhanced IDE, IDE RAID (AK37GTR Only), and Floppy
Connectors
The mainboard features two 40-pin dual-channel IDE device connectors
(IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM
and Hard Disk Drives (H.D.D.) and features two 40-pin dual-channel IDE
RAID device connectors (RAID1/RAID2) providing support for up to four IDE
devices, such as Hard Disk Drives (H.D.D.).
This mainboard also includes one 34-pin floppy disk controller (FDD1) to
accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard
comes with one 80-pin ATA 133/100/66 ribbon cable to connect to IDE
(RAID) H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
Note : If you used RAID connector, please refer to IDE RAID Manual
to setup RAID BIOS program.
Important: Ribbon cables are directional, therefore, make sure to always
connect with the red cable.
FD
C
1
1
ID
E2
1
ID
E1
1
RAID2
IDE4
RAID1
IDE3
1
1
