- 43 -
3.3 System Memory Configuration
The AK37GT/AK37GTR mainboard has four 184-pin DIMM slots that allow
you to install from 64MB up to 4GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommodate
64MB, 128MB, 256MB, 512MB, and 1GB of PC1600/PC2100/PC2700/
PC3200 compliant 3V single (1 Bank) or double (2 Bank) side 64-bit wide
data path DDR SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
DDR SDRAM
The PC2700 module only support 6 Bank shown as follows:
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM slots. The total system memory is
calculated by simply adding up the memory in all DIMM slots. After up-
grade, the new system memory value will automatically be computed and
displayed in the field " Standard CMOS Setup" of BIOS setup program.
DIMM Slot
Memory Modules
Module
Quantity
DIMM 1
64MB, 128MB, 256MB
,
512MB (x8x16), and
1GB 184-pin 2.5V DDR SDRAM DIMM
x 1
DIMM 2
64MB, 128MB, 256MB
,
512MB (x8x16), and
1GB 184-pin 2.5V DDR SDRAM DIMM
x 1
DIMM
3
64MB, 128MB, 256MB
,
512MB (x8x16), and
1GB 184-pin 2.5V DDR SDRAM DIMM
x 1
DIMM
4
64MB, 128MB, 256MB
,
512MB (x8x16), and
1GB 184-pin 2.5V DDR SDRAM DIMM
x 1
Memory
DIMM
1
DIMM
2
DIMM
3
DIMM
4
TOTAL
PC2700
Module
Single side
Single side
Single side
Single side
4 BANK
Double side
Single side
Single side
Single side
5 BANK
Double side
Double side
Single side
Single side
6 BANK
Double side
Double side
Double side
Empty
6 BANK
