- 10 -
-
I/O Interface
Provides a variety of I/O interfaces:
Ø
1 x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø
1 x PS/2 mouse connector.
Ø
1 x PS/2 Keyboard connector.
Ø
2 x DB9 Serial connectors 16550 UART compatible.
Ø
1 x Infrared communication port.
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
Ø
1 x DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
Ø
1 x Line-Out (Front-Out) port.
Ø
1 x Line-In port, shared with rear speaker output when multi-channel
audio is enabled.
Ø
1 x Mic-In port.
Ø
1 x MIDI/GAME port.
-
6 USB Ports Onboard
Ø
4 x USB connectors on back-panel and one sets of dual USB ports
header on mid-board.
-
PCI Bus Master IDE Controller Onboard
Two UltraDMA 133/100/66 Bus Master Dual-channel IDE ports provide sup-
port to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements the data transfer speed up to 133/100/66 MB/
sec and also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
-
ATX Power Supply Connector
ATX power supply unit can be connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
