- 39 -
Note: Before connect your IR device, please be sure each IR on board
pin allocation is matchable with the pin of the IR device. Other
wise, incorrect IR connection may do damage to your IR device.
Step 1. Attach the 6-pin infrared device cable to J10.
(Refer to the above diagram for IR pin assignment.)
Step 2. Configure the Infrared transfer mode in field "UART Mode Select"
of "Super I/O Device" of "Integrated Peripherals" sub-menu in
BIOS setup program. This mainboard supports IrDA and Normal
transfer modes.
Wake-On-LAN Connector (WOL1)
Attach a 3-pin connector through the LAN card which supports the Wake-On-
LAN (WOL1) function. This function lets users wake up the connected system
through the LAN card.
Pins Assignment:
1=5VSB
2=GND
3=RING#
Audio CD_IN Connector (J2) (Write) / CD_IN (J3)(Black)
Port J2 & J3 is used to attach an audio connector cable from the CD-ROM
drive.
J2 Pin Assignments:
1=CD-GND
2=CD-R
3=CD-GND
4=CD-L
3 2 1
E4
JP 4
WOL
1
E5
J3
J2
CD_IN
CD_IN
1
1
4 3 2 1
