Shuttle AB48 Manual Download Page 45

Page: 45 / 83

- 43 -

4 SOFTWARE UTILITY

4.1 Mainboard CD Overview

Note:

Note: The CD contents attached in AB48/AB48N mainboard are subject to

change without notice.

To start your mainboard CD disc, just insert it into your CD-ROM drive and

the CD AutoRun screen should appear. If the AutoRun screen does not

appear, double click or run D:\Autorun.exe (assuming that your CD-ROM

drive is drive D:)

Navigation Bar Description:

Install Mainboard AB48 Software

Install Mainboard AB48 Software - Installing Intel Chipset, Intel Ultra

ATA, Audio drivers.

Install Mainboard AB48N Software

Install Mainboard AB48N Software - Installing Intel Chipset, Intel

Ultra ATA, Audio, LAN drivers.

Manual

Manual - AB48/AB48N Series mainboard user's manual in PDF format.

Link to Shuttle Homepage

Link to Shuttle Homepage - Link to shuttle website homepage.

Browse this CD

Browse this CD - Allows you to see contents of this CD.

Quit

Quit - Close this CD.

Summary of Contents for AB48




















































































Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands

Shuttle AB48, Manual

Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands