Abit IX38 QuadGT User Manual Download

Page: 1 / 88

Hardware Setup

BIOS Setup

Driver & Utility

Multilingual QIG

Appendix

IX38
QuadGT

Motherboard

Socket 775

User’s Manual

About this Manual:

This user’s manual contains all the information you may
need for setting up this motherboard. To read the user’s
manual of PDF format (readable by

Adobe Reader

), place

the “Driver & Utility CD” into the CD-ROM drive in your
system. The auto-run screen will appear, click the
“Manual” tab to enter its submenu. If not, browse the

root directory of the CD-ROM via the File Manager, and
double click the “AUTORUN” file.

Chipsets: Intel X38 / ICH9R

FSB 1333 MHz

Dual Channel DDR2 1066

Dual PCI-E X16 Slots

Gigabit LAN

6x Internal, 2x External SATA
3Gb/s Connectors

USB 2.0 / IEEE 1394

7.1-Channel HD Audio

abit uGuru™

Technology

abit Silent OTES™ Technology

External CMOS Clearing
Button

Quick Power & Reset Button

Vista HW Ready

Summary of Contents for IX38 QuadGT

























































































Search results

Summary of Contents for IX38 QuadGT

Reviews:

Related manuals for IX38 QuadGT

Brands by name

Popular brands

Abit IX38 QuadGT, User Manual

Search results

Summary of Contents for IX38 QuadGT

Reviews:

Related manuals for IX38 QuadGT

Brands by name

Popular brands