Shuttle AB48 Manual Download Page 4

Page: 4 / 83

- 2 -

3.2 JUMPER SETTINGS .................................................................................. 24

JUMPERS & CONNECTORS GUIDE .................................................... 25

Jumpers

Clear CMOS Setting (JP2) .................................................................... 28

BIOS flash protection Setting (JP4)......................................................... 28

LAN Select on Board Setting (JP21) ...................................................... 29

Back-Panel Connectors

PS/2 Keyboard & PS/2 Mouse Connectors ............................................ 30

Parallel Port Connector...........................................................................30

COM1/2 Port Connectors ....................................................................... 30

Line-Out (6-Channel Front-Out) Port Connector ...................................... 30

Line-In (6-Channel Rear-Out) Port Connector .......................................... 31

Mic-In (6-channel Center/Bass-Out) Port Connector ................................ 31

MIDI/GAME Port Connector .................................................................... 31

USB1/USB2 Port Connectors .................................................................31

LAN Port Connector (AB48N Only) ......................................................... 31

Front-Panel Connectors

Green LED Connector (Green LED) .......................................................32

HDD LED Connector (HLED) .................................................................32

ATX Power On/Off Switch Connector (Power On) ...................................33

Hardware Reset Connector (Reset) ........................................................ 33

Power LED Connector(Power LED) .......................................................34

System Management Interface Connector (EPMI) ...................................34

Speaker Connector (SPEAKER) ............................................................ 35

Extended USB Header (JP7/8) ............................................................... 35

Internal Peripherals Connectors

Enhanced IDE and Floppy Connector ..................................................... 36

Summary of Contents for AB48




















































































Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands

Shuttle AB48, Manual

Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands