- 38 -
CPU, AGP, Chipset and Chassis Fan connectors - FAN1/2/3
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), AGP (FAN2), Chassis (FAN3) cooling fans.
Note:
Note:
Note:
Note:
Note:
Both cable wiring and type of plug may vary,
which depends on the fan maker. Keep in
mind that the red wire should always be
connected to the+12V headerand the black
wire to the ground (GND) header.
Wake-On-LAN Connector (JP6)
Attach a 3-pin connector through the LAN card which supports the Wake-On-
LAN (JP6) function. This function lets users wake up the connected system
through the LAN card.
Pins Assignment:
1=Power
2=GND
3=RING#
E2
E3
FAN1/2/3 with rotate sense.
SENSE
GND +12V
1
3 2
FA N 3
1
FA N 2
FA N 1
1
1
W O L
JP 6
1
