Shuttle AB48 Manual Download Page 75

Page: 75 / 83

- 73 -

Wake-Up by PCI card

This item Enabled/Disabled PCI card wakeup for PCI Spec 2.2.

The choice: Enabled or Disabled.

Power On by Ring

This item determine the system will resume by activating of modem

ring.

The choice: Enabled or Disabled.

Wake Up On LAN

This item Enabled/Disabled LAN wakeup .

The choice: Enabled or Disabled.

USB KB Wake-Up Fram S3

Set the item Enabled, users can awaken the system by USB keyboard.

When ACPI Suspend Type item select is S1(POS), then this item can not

show up.

The choice: Disabled or Enabled.

Resume by Alarm

When this item enabled, you can set the date and time at which the

RTC (real-time clock) alarm awakens the system from Suspend mode.

The choice: Disabled or Enabled.

Data (of Month) Alarm

This item selects the alarm date.

Key in a DEC number:Min=0, Max=31.

Time (hh:mm:ss) Alarm

This item selects the alarm Time.
[hh]

Key in a DEC number:Min=0, Max=23.[mm/ss]

*** Reload Global Timer Events ***

If any of these items is set to Disabled, system will not monitor the

activity event and reload global timer. If these items is set to Enabled,

system will monitor the system activity event; if any of the events it

monitored, it will cause system to reload global timer. These items

include Primary IDE0/1, Secondary IDE 0/1, Floppy Disk, Serial Port,

Parallel Port, and PCI PIRQ[A-D]#.

The choice: Disabled or Enabled.

Summary of Contents for AB48




















































































Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands

Shuttle AB48, Manual

Search results

Summary of Contents for AB48

Reviews:

Related manuals for AB48

Brands by name

Popular brands