Shure Incorporated
13/17
•
•
•
Hirose Wiring for Sony Bodypacks
Notes:
When using TwinPlex mics with Sony Hirose 4pin bodypacks, Shure recommends purchasing Shure –MTQG versions
and not –NC versions. This facilitates an easier termination due to the lack of circuitry required in Shure 3wire/MTQG
TA4F products.
Due to the thin cable on TwinPlex and the large boot on Hirose connectors, heat shrink may be required to build up the ca
ble under the boot where the crimp connection is made and where the cable exits the boot
The TwinPlex Microdot (-MDOT) version can be used with 4-pin Hirose adapters from DPA (DPA part # DAD6008)
Series
Cable
Con
struc
tion
Electri
cal De
sign
Polari
ty
Replacement
Connector
For Use
With
Wiring
Line Art (From Solder
Side)
TH53-
LEMO
TH53-
NC
1.6mm
cable
with 2
con
duc
tors, 2
shield
wires
and
shield
2-Wire
(Com
mon
Source)
Nega
tive
with
re
spect
to
ground
Hirose 4-pin-
KMC-9BPD-4P
Sony Hirose
Bodypacks
(WRT)
Red wire: Audio/Bias:
Into resistor and ca
pacitor
1: 8.2k resistor
2: Jumper to 4
3: 1 uF capacitor (-)
4: Ground/shield-
jumper to 2
Split Shield to shell
Blue wire: not used
TH53-
MTQG
1.6mm
cable
with 2
con
duc
tors, 2
shield
wires
and
shield
3-Wire
(Source
Follow
er)
Posi
tive
with
re
spect
to
ground
Hirose 4-pin-
KMC-9BPD-4P
Sony Hirose
Bodypacks
(WRT)
1: Red wire (Bias)
2: Blue wire (Audio)
3: Jumper to 4
4: Ground/shield-
jumper to 3
Split Shield to shell