![background image](http://html1.mh-extra.com/html/shure/dp11eq/dp11eq_user-manual_1262691029.webp)
28
English –
APPENDIX B. RACK MOUNTING THE DP11EQ
The DP11EQ comes in a
1
/
2
-rack chassis specially designed for sturdiness. The sagging and
bending found in most
1
/
2
-rack designs is eliminated — the brackets and straddle bars are designed
to ensure that the units will be installed securely.
WARNING: Do not torque the screws too tightly, or the chassis may be dam-
aged.
Single Unit
ÑÑÑÑ
ÑÑÑÑ
ÑÑ
ÑÑ
Ñ
ÑÑÑÑÑ
Ñ
Ñ
ÑÑÑ
ÑÑÑ
ÑÑÑ
Ñ
ÑÑÑÑÑ
ÑÑ
ÑÑÑÑ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
ÑÑÑÑÑ
ÑÑÑÑ
Ñ
ÑÑ
ÑÑ
Ñ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñ
Ñ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
DATA
1.
Align the supplied rack-mount brackets over the holes.
2.
Fasten with the 8 supplied screws.
Dual-Mounted Units
Ñ
Ñ
ÑÑÑÑÑ
Ñ
Ñ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
Ñ
ÑÑÑÑ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑÑÑ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
ÑÑÑÑ
ÑÑÑÑ
Ñ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑÑÑÑ
Ñ
ÑÑÑ
ÑÑÑ
ÑÑÑ
Ñ
ÑÑÑÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
Ñ
Ñ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñ
Ñ
Ñ
ÑÑ
ÑÑ
Ñ
Ñ
Ñ
ÑÑ
ÑÑ
Ñ
Ñ
ÑÑ
Ñ
DATA
DATA
1.
Align two units side by side so that the front panels both face the same direction.
2.
Place the supplied straddle bars in the recesses on the top and bottom of the units, so
that they overlap both. Fasten with the supplied screws.
NOTE: Be sure to use both straddle bars when installing dual units.
3.
Position the rackmount brackets over the holes in the side of the unit. Fasten with the
supplied screws.
Mounting in an Equipment Rack
ÑÑ
ÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñ
Ñ
ÑÑÑÑÑ
ÑÑ
ÑÑ
Ñ
Ñ
Ñ
ÑÑÑÑÑ
ÑÑ
Ñ
ÑÑ
Ñ
ÑÑÑÑ
Ñ
ÑÑ
ÑÑ
ÑÑÑÑÑ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
Ñ
ÑÑÑÑ
Ñ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñ
ÑÑÑÑ
Ñ
ÑÑ
ÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
ÑÑÑÑÑ
Ñ
Ñ
ÑÑÑÑÑ
Ñ
ÑÑÑÑÑ
Ñ
Ñ
ÑÑÑÑÑ
Ñ
Ñ
Ñ
ÑÑ
ÑÑ
SINGLE MOUNT
DUAL MOUNT
Ñ
DATA
DATA
DATA
1.
Insert the unit(s) into a 19-inch equipment rack.
2.
Fasten the unit(s) to the rack using all four of the supplied screws.