Shure ANI22-BLOCK, User Manual, Page: 29 / 35

9/12/17, 9(22 AM Shure Publications | User Guides | ANI22
Page 29 of 35 http://pubs.shure.com/guide/ANI22/en-US
ANI22 Response:
< REP LIMITER_ENGAGED ON >
< REP LIMITER_ENGAGED OFF >
The ANI22 will respond with one of these
strings.
Get Encryption Status
Command String:
< GET
xx
ENCRYPTION_CH >
ANI22 Response:
< REP
xx
ENCRYPTION_CH ON >
< REP
xx
ENCRYPTION_CH OFF >
The ANI22 will respond with one of these
strings.
Get Phantom Power Status
Command String:
< GET
xx
PHANTOM_PWR_ENABLE >
ANI22 Response:
< REP
xx
PHANTOM_PWR_ENABLE ON >
< REP
xx
PHANTOM_PWR_ENABLE OFF >
The ANI22 will respond with one of these
strings.
Turn Phantom Power On/Off
Command String:
< SET
xx
PHANTOM_PWR_ENABLE ON >
< SET
xx
PHANTOM_PWR_ENABLE OFF >
Send one of these commands to the ANI22.
ANI22 Response:
< REP
xx
PHANTOM_PWR_ENABLE ON >
< REP
xx
PHANTOM_PWR_ENABLE OFF >
The ANI22 will respond with one of these
strings.
Reboot ANI22
Command String:
< SET REBOOT >
ANI22 Response:
< REP REBOOT >
Get Error Events
Command String:
< GET LAST_ERROR_EVENT > Gets the last error that is loged on the
ANI22.
ANI22 Response:
< REP LAST_ERROR_EVENT
{
yyyyyyyyyyyyyyy
} >
Where yyyyyyyyyyyyyyy is up to 128
characters.
Get PEQ Filter Enable
Command String: Where
xx
is the PEQ block 01-04. Where