9/12/17, 9(22 AM
Shure Publications | User Guides | ANI22
Page 19 of 35
http://pubs.shure.com/guide/ANI22/en-US
Custom Presets
Use presets to quickly save and recall settings. Up to 10 presets can be stored on each
device to match various seating arrangements. A preset saves all device settings except
for the Device Name, IP Settings, and Passwords. Importing and exporting presets into
new installations saves time and improves workflow. When a preset is selected, the name
displays above the preset menu. If changes are made, an asterisk appears next to the
name.
Note: Use the default settings preset to revert to the factory configuration (excludes Device Name, IP
Settings, and Passwords).
Open the presets menu to reveal preset options:
save as preset:
Saves settings to the device
load preset:
Opens a configuration from the device
import from file:
Downloads a preset file from a computer onto the device. Files
may be selected through the browser or dragged into the import
window.
export to file:
Saves a preset file from the device onto a computer
Networking and Dante
Dante Transmit Flows
This device supports up to two transmit flows and two receive flows. A single flow consists
of up to four channels, through either a unicast or multicast transmission.
A unicast flow is a point-to-point connection between two devices, supporting up to
four channels per flow.
A multicast flow is a one-to-many transmission, which supports sending up to four
channels to multiple receiving devices across the network.
Shure Device Applications
This device can connect with up to two Dante devices.
The Shure MXA310, ANI22, ANIUSB-MATRIX and ANI4IN support multicast transmission.
This means that flows can transmit to multiple devices -- as many as the network can
support. If using unicast flows, each of these devices can connect with up to two Dante
receiver devices.
The Shure ANI4OUT connects with up to two Dante transmitter devices.
Pushing Device Names to the Dante Network
To send a device name to appear in Dante Controller, go to Settings>General and enter a