Shure ANI22-BLOCK, User Manual, Page: 28 / 35

9/12/17, 9(22 AM Shure Publications | User Guides | ANI22
Page 28 of 35 http://pubs.shure.com/guide/ANI22/en-US
< SET LED_BRIGHTNESS
n
> 0 = LED disabled
1 = LED dim
2 = LED default
ANI22 Response:
< REP LED_BRIGHTNESS
n
>
Get Audio Clip Indicator
Command String:
< GET
xx
AUDIO_OUT_CLIP_INDICATOR
>
Where
xx
is ASCII channel number: 00
through 04.
ANI22 Response:
< REP
xx
AUDIO_OUT_CLIP_INDICATOR
ON >
< REP
xx
AUDIO_OUT_CLIP_INDICATOR
OFF >
The ANI22 will respond with one of these
strings.
Get Audio IP Address
Command String:
< GET IP_ADDR_NET_AUDIO_PRIMARY >
ANI22 Response:
< REP IP_ADDR_NET_AUDIO_PRIMARY
{
yyyyyyyyyyyyyyy
} >
Where yyyyyyyyyyyyyyy is a 15 digit IP
address.
Get Audio Subnet Address
Command String:
< GET IP_SUBNET_NET_AUDIO_PRIMARY >
ANI22 Response:
< REP IP_SUBNET_NET_AUDIO_PRIMARY
{
yyyyyyyyyyyyyyy
} >
Where yyyyyyyyyyyyyyy is a 15 digit subnet
address.
Get Audio Gateway Address
Command String:
< GET IP_GATEWAY_NET_AUDIO_PRIMARY
>
ANI22 Response:
< REP IP_GATEWAY_NET_AUDIO_PRIMARY
{
yyyyyyyyyyyyyyy
} >
Where yyyyyyyyyyyyyyy is a 15 digit
gateway address.
Get Limiter Status
Command String:
< GET LIMITER_ENGAGED > Indicates if the limiter is currently reducing
the signal level.