SHOWTEC Mistique, Manual

Page: 6 / 56

5
Ordercode: 60769
Mistique
● If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
● If the Mistique fails to work properly, discontinue use immediately. Drain all haze liquid from the tank,
pack the unit securely (preferably in the original packing material), and return it to your Showtec
dealer for service.
● For replacement use fuses of same type and rating only.
● The haze vapour at the point of release is under pressure and is extremely hot.
● The output nozzle becomes very hot during operation (300 ºC). Keep flammable materials at least
50 cm away from the nozzle.
● The use of haze-fluid is only allowed for adults.
● In dense, haze-saturated surroundings, the oxygen portion is substantially reduced!
● The haze density must be portioned in a way that the visibility of at least 5 m is preserved - Danger of
anxiety state due to missing orientation!
● Every haze-filled room must be overseen by a skilled person.
● Allow time to cool down, before cleaning or servicing.
● Provide sufficient lighting of the surroundings when installing the device.
● The user is responsible for correct positioning and operating of the Mistique. The manufacturer will not
accept liability for unsafe situations, accidents, damages caused by:
- The misuse or incorrect installation of this device.
- Ignoring warnings or instructions as shown in this manual.
- Using the Mistique for purposes or conditions other than specified in this manual.
- Changes to the Mistique. This includes the use of other than original spare parts.
- Inadequate maintenance.
- The unauthorized removal of safety symbols, safety covers and / or guards.
- The improper use of the Mistique.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
CO
2
Use
The Mistique uses liquid or gaseous CO
₂
as input. The application of CO
₂
involves serious risks.
Make sure that you are aware of these risks before installation and/or operation.
Always use approved CO
₂
cylinders, hoses and connections.
Always consult your CO
₂
supplier for regulations and instructions on safe installation and use.
Showtec is not liable for unsafe situations, accidents and damages that are the result of incorrect working
with CO
₂
gas and CO
₂
cylinders.
Inadequate installation and/or operation of a CO
₂
powered machine and CO
₂
cylinders can lead
to death or serious injury. Always follow the instructions from this manual, from your CO
₂
supplier and from
local authorities.