SHOWTEC Mistique, Manual

Page: 13 / 56

12
Ordercode: 60769
Mistique
Setup and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120 V specification product on 230 V power, or vice versa.
Note: Always monitor haze tank level liquid indicator when creating a fine haze!
Note: Be careful not to exceed the maximum fluid level. DO NOT OVERFILL!
Note: You can only fill 75 % of the tank, due to compression (that is, not more than 2 L in the tank).
Note: Running a haze machine with no hazer liquid can permanently damage the unit!
Note: Never shut down the Mistique while making haze.
Note: The Mistique needs a CO
2
connection with a gas tank to create haze.
Note: Installation and operation of the Mistique requires professional and trained personnel.
Remove cover and fan to change output direction
You can change the output direction by removing the metal cover or by turning the fan upside-down.
Change front only when device is not running and cold.
01)
First unscrew the 2 screws (A).
02) Then remove the DC plug from the device (B).
03) Remove the cover by pulling it up and then away from the device (C).