SHOWTEC Mistique, Manual

Page: 12 / 56

11
Ordercode: 60769
Mistique
Installation
Remove all packing materials from the Mistique. Check if all foam and plastic padding is removed,
especially in the haze output area.
Use the Mistique only with MHL-2 hazer fluid (
60569 ). Any other types of liquid can damage the unit.
The unit can also be operated at floor level or sitting on any regular surface as well.
Do not point the output in a direction that will aim directly at a person.
Whatever installation method you choose, the unit must always be placed in horizontal position.
The maximum inclination angle of the device should not exceed 30º.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Always follow the instructions from this manual, from your CO
₂
supplier and from local authorities.
Precautions for operation
Using a damaged or an improperly installed machine can lead to death, serious injury or
property damage. Always inspect the machine thoroughly before operation.
Missing or obscured safety symbols on the machine can cause unawareness, which in turn can
lead to death, serious injury or property damage. Make sure all safety symbols are correctly in
place and visible. See front side of the device.