10
Dipswitch setting for DMX Mode
When all dipswitches are turned off, the DJ LED Flower is in DMX Mode.
- Dipswitches #1 - #8 control the DMX Addresses.
DMX Address
DMX products must have their own "address" to receive DMX signals.
Addresses on the controller are set
by flipping the appropriate DMX dipswitches.
You need to know that DMX address settings are the sum of the dip switch values.
A standard DMX address for a Showtec LED Roto Flower, which has 6 channels is as follow:
Example
LED Roto Flower
Address Value
DMX Dip Switches "ON"
Unit 5
25
#1 , #4, #5
Switch
Value
#1
1
#4
8
#5
16 +
Total sum
25
Explanation: Since each unit has 6 channels, each address advances 6 values (See Address Value
above).
Once address values are determined, add DMX dipswitch values to obtain the appropriate address
(DMX Dip Switches "ON") for each unit. Flip appropriate DMX dipswitches on each unit.
Example:
1.
If you want to give an LED Roto Flower DMX address133, you first have to find the number 133 in the
DMX Chart. (See page 11)
2.
Then look at the left side (Dip Switches #1-#5) horizontally from 133.
In the Table you’ll see #1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.
3.
Finally look at the upper side of the table (Dip Switches #6-#9) vertically from 133.
In the Table you’ll see #6=OFF, #7=OFF, #8=ON, #9=OFF.
