9
The LED Design Par has a total of 3 DMX channel configurations, referred to as
Personalities
.
The 3 personalities are [STAGE 1, ARC1, ARC1+D].
Each of the different personalities can be accessed from the control panel.
Control Panel
Fig. 5
A.
Display
D.
Down Button
B.
[SET] Button
E.
EXIT Button
C.
UP Button
DMX512 ADDRESSING WITHOUT ID ADDRESSING
1)
Connect a DMX controller (example 50333 Scanmaster 2 MKII) to the series of LED Design Pars.
2)
Each LED Design Par has 9 DMX channels (DMX address LED Par #1=1, Par #2=10, Par #3=19,
Par #4=28, etc.).
3)
The ID address has not been set, so therefore when using the controller CH9 must be inactive (CH9=0).
It is also possible to deactivate the ID address, by selecting ID OFF from the Settings menu.
4)
Any DMX address in the range from 001 to 512 may be used.
Scanmaster 2 MKII (
50333
)
Note: When using the LED Design Pars, the CH9 ID function must be inactive (CH9=0).
Summary of Contents for LED Design Par18 RGB
Page 1: ...LED Design Par 18 RGB ORDERCODE 42570...
Page 13: ...11 MENU OVERVIEW 9 channels 3 channels 4 channels...
Page 22: ...20 Beam Angles...
Page 26: ......
