10
DMX512 ADDRESSING WITH ID ADDRESS (STAGE MODE 1)
1)
Connect a DMX controller (example 50333 Scanmaster 2 MKII) to the series of LED Design Pars.
2)
Each LED Design Pars has 9 DMX channels (DMX address LED Par #1=1, Par #2=10, Par #3=19,
Par #4=28, etc.).
3)
Any DMX address in the range from 001 to 512 may be used.
4)
Each DMX address may carry up to 66 separate ID addresses.
5)
The ID Address should be set in the SETTINGS menu, on each unit in ascending values (i.e. 1,2,3...).
6)
ID On should be set in the SETTINGS menu on each unit.
7)
ID addresses are accessible from CH9 on the DMX512 controller.
Scanmaster 2 MKII (
50333
)
Example 1
The figure above shows a simple DMX layout. All the LED Design Pars have different ID addresses which
allows the user to collectively control the whole group of LED Design Pars with the same DMX address by
setting CH9 to 0, or to control each LED Design Par independently by first selecting the DMX address and
then by using CH9 to locate the target ID address.
Scanmaster 2 MKII (
50333
)
Example 2
The figure above shows a simple DMX layout. All 3 LED Design Pars have different ID addresses, which
allows the user to collectively control a group of 3 LED Design Pars with the same DMX address by setting
CH9 to 0, or to control each LED Design Par independently by first selecting the DMX address and then by
using CH9 to locate the target ID address.
Summary of Contents for LED Design Par18 RGB
Page 1: ...LED Design Par 18 RGB ORDERCODE 42570...
Page 13: ...11 MENU OVERVIEW 9 channels 3 channels 4 channels...
Page 22: ...20 Beam Angles...
Page 26: ......
