4
Illumisphere 50
Product code: 41123
1.
Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
●
Showtec Illumisphere 50
●
1 x non-detachable power cable to Schuko (1 m)
●
2 x non-detachable DMX cables with 3-pin DMX
IN/OUT connectors (0,8 m)
●
User manual
Fig. 01
Intended Use
This device is intended for professional use as a decorative light effect. It is suitable only for indoor
installation. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Product Lifespan
This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in operation. This will reduce the wear and will improve the device’s
lifespan.
LEDs Lifespan
The light output of the LEDs gradually decreases over time (lumen depreciation). High operating
temperatures contribute to this process. You can extend the lifetime of the LEDs by providing adequate
ventilation and operating the LEDs at the lowest possible brightness.
