18
Illumisphere 50
Product code: 41123
Control Panel
A)
OLED display
B)
Sound-controlled mode indication LED (green)
C)
ENTER button
D)
DOWN button
E)
UP button
F)
MENU button
G)
DMX control mode indication LED (red)
Fig. 09
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu or to set the currently selected value.
●
Use the MENU button to exit the current menu and/or to return to the main menu.
The green indication LED (B) will start blinking when the device is operated in sound-controlled mode.
The red indication LED (G) will be on when the device is operated in DMX control mode. The LED will turn
off when the DMX signal is lost or discontinued.
Start-up
After powering up, the display will show the start screen:
The start screen provides information about the active run mode of the device, the DMX starting address,
the current DMX channel mode and the firmware version.
After 15 seconds of inactivity the display will return to the start screen and after another 30 seconds it will
turn off. Press any button to activate the display. The display will show the start screen.
